Focus Works Dragon Driver
FW dragon DRIVER specifications
The FW Dragon Driver is a customized version of the popular Dragon driver. It has a different selection of mode groups than the standard one.
This is a FET driver with a secondary channel. This driver is rated from 3.0 to 4.5 volts so only power with a single 3.7 volt lithium-ion battery.
Specifications:
Mode Groups:
1 - LOW RED, HIGH RED , 15% 100%
2 - 35%, 100%, low red
3 - 25%, 45%, 100%, high red
4 – moonlight, 25% 50% 100%
5 - LOW RED, HIGH RED, moonlight 5% 15% 35% 50% 100%
6 - LOW RED, HIGH RED, 50% 100%
7 - HIGH RED, 100%
8 - 25% 80%
9 – LOW RED, moonlight 35%
100 is Turbo
Reversing options(1/2second press) as follows:
Turbo--->Strobe--->Batt Check (1-8 with 8 being full) ---> Bike Indicator Strobe
Configuration Options:
To enter configuration mode, quickly momentarily press (do not click) the button 15+ times until it starts to flash when held on. Once it starts to flash, you are in configuration mode.
Once in configuration mode, the light will give a solid flash between 1 and 5 times. The number of solid flashes indicates the option number to be changed. To select/change the option turn the light off and back on during the strobing flashes that immediately follow the solid flashes. For instance, when you choose option 1 it will start to flash 1-8 times, turn off and back on after the number of the group you want comes up. When setting the temperature control the light will go from programming to turbo, turn the light off when it reaches the temperature you desire.
1. Mode Group Select.
2. Memory Toggle.
3. Mode Order Toggle.
4. Temperature Calibration Mode.
5. Reversing Toggle.
This is a FET driver with a secondary channel. This driver is rated from 3.0 to 4.5 volts so only power with a single 3.7 volt lithium-ion battery.
Specifications:
- 3.7 volt driver
- fet primary output
- linear secondary output
Mode Groups:
1 - LOW RED, HIGH RED , 15% 100%
2 - 35%, 100%, low red
3 - 25%, 45%, 100%, high red
4 – moonlight, 25% 50% 100%
5 - LOW RED, HIGH RED, moonlight 5% 15% 35% 50% 100%
6 - LOW RED, HIGH RED, 50% 100%
7 - HIGH RED, 100%
8 - 25% 80%
9 – LOW RED, moonlight 35%
100 is Turbo
Reversing options(1/2second press) as follows:
Turbo--->Strobe--->Batt Check (1-8 with 8 being full) ---> Bike Indicator Strobe
Configuration Options:
To enter configuration mode, quickly momentarily press (do not click) the button 15+ times until it starts to flash when held on. Once it starts to flash, you are in configuration mode.
Once in configuration mode, the light will give a solid flash between 1 and 5 times. The number of solid flashes indicates the option number to be changed. To select/change the option turn the light off and back on during the strobing flashes that immediately follow the solid flashes. For instance, when you choose option 1 it will start to flash 1-8 times, turn off and back on after the number of the group you want comes up. When setting the temperature control the light will go from programming to turbo, turn the light off when it reaches the temperature you desire.
1. Mode Group Select.
2. Memory Toggle.
3. Mode Order Toggle.
4. Temperature Calibration Mode.
5. Reversing Toggle.