F2R Geoskin Flashlight Titanium

Geoskin is our latest 3D milled texture.  Named for the geometric facets that make up the texture it shimmers and sparkles' in the light.  It's pretty amazing! We took the popular F2 light, modified it into an R variant and added Geoskin. The R stands for reflector, and what a reflector it is!  We were able to get a limited number of the popular and exquisite Mcr18 reflectors.  Once these reflectors run out the F2R will be finished because its highly unlikely I'll be able to get any more. 

And what better to pair it with than an amazing 4500k Nichia 519a emitter and H17fx driver.  I normally don't offer F series lights with the H17fx but figured I'd go all out to celebrate this reflector/emitter/texture combo.

• Titanium body
• Nichia 519a 4500k  LED
• Choice of H17fx or Qlite driver
• Grade 5 titanium pocket clip
• Runs on a 14500 lithium ion rechargeable battery (sold separately)
• Runtimes (Qlite driver):
  • 16+ hours on low
  • 30 minutes then steps down to medium for 3+ hours
  • It stores a little extra once its out of power so you can turn it on for a few seconds at a time to help you get home
• Weight with a battery 104g
• 4-1/16" (104mm) x 7/8" (22mm) diameter
• Designed and made in Canada

What emitter (LED) should you get?

This light is available with the newest, state of the art Nichia 519a 4500k Emitter.  It has a slightly rosy color and is a 90+ CRI emitter.

CRI is a measure of how well an LED shows color.  Sunlight is 100CRI.  So the Nichia 519a at 90+ is more than 90% as good as the sun at showing accurate colors.  

4500k is the color of the light.  Remember the yellowish color of old incandescent light bulbs?  That color was approximately 3500k.  Lower numbers indicate more yellowish light and higher numbers tell you it's bluer.  4500k strikes a nice balance between blue and yellow light and looks very nice.  Side note for more context, 6000k has a noticeably blue note to it.